Featuring all of the advantages of the Torch freehub -low drag, low weight, and the ultimate in freehub compatibility- tied into a traditional, "Classic" hub.

The Torch road hubs use the same drivering and pawls as the mountain hubs. However, we reduced the pawl count to 3 instead of 6 for lower drag and weight while still achieving an industry leading (for road hubs) 6 degree engagement.  Relocated bearings, and a new freehub seal reduce freehub drag while coasting.  

The Torch road hubs now feature custom Teflon contact seals for the endcaps, which we manufacture in-house. They fully seal the hubs from mud and water - tight enough for a muddy CX season, but smooth enough for drag-free road miles.

Available in 11 different colors and multiple drilling options. 

Close

Torch front hub

2 bearing hub with oversized axle and external seals.

100mm QR, 9mm, 12mm, 15mm thru axle options.

Angled flanges for lower spoke stresses

Available in 24, 28, or 32-hole drilling. 

Hybrid Ceramic bearings availalbe. 

110 grams – depending on axle and bearing spec

Torch rear hub

4 bearing hub with oversized , butted 20/17mm axle and external seals.

135mm QR, 10x135, and 12x142 thru axle options.

Angled flanges for lower spoke stresses.

9/10/11 speed HG freehub or Campy freehubs available. SRAM XD-R freehub available.  

60 point - 6 degree engagement - 3 pawl freehub

Available in 24, 28, or 32-hole drilling.

245 grams – weight varies depending on bearing, endcap, and freehub spec.

Skewers not included

Close

Drilling: F- 24, 28, 32. R- 24, 28, 32.

Available Colors - Red, Black, Silver, Blue, Gold, Orange, Pink, Purple, Green, Lime and Turquoise 

Campy Freehub available.

Hybrid Ceramic bearings*

* -Upcharges apply

Close

MSRP: $190 front

MSRP: $385 Rear  

MSRP: $575 Set

 

Close