Enduro. The standard-bearer of the Industry Nine line-up. To us, it's not a gimmicky catch word employed to sell more wheels and cash in on hype. Our backyard is Pisgah National Forest - A place where you have to "earn your turns" if there ever was. Before enduro was "Enduro" we were spending all day in the woods climbing mountains and pushing how fast we could ride back down them. As the seasons ticked on and the tastes change, our Enduro wheelset evolved with it. Our first generation Torch series Enduro measured in at 26mm inner width, while our latest, second generation Enduro comes in at a generous 30.5mm IW, while still retaining the "ride everything" mentality we forged with our first wheelset we dubbed Enduro eight years ago.
-Lightweight. The 32 hole Torch hub and spoke platform cuts an incredible amount of weight without sacrificing strength or performance. The tapered spokes are thicker without being heavy, the hubshell is lighter without loosing it's strength, and the drivering is thinner while maintaining it's quick engagement.
-Durability. By utilizing Teflon shields and O-rings that snap onto the endcaps, our hubs have two seals on each bearing to help keep grit out, significantly increasing the bearing life. Which helps you stay out of bike shops and onto the Trails -where you belong.
-Performance. Through clever bearing arrangement in the freehub, we have managed to keep the 3° engagement, yet eliminate the drag. Thicker spokes stiffen up the ride without making it harsh, and an oversized axle efficiently delivers the power. Ratcheting over rocks, boosting through berms, and making your buddies look like hacks has never been so easy.
-Traction. The massive 30.5mm internal width of the Enduro305 rim provides more volume and support for tires, leaving you with better traction and less flats. Couple that with our second generation tubeless technology, and you can run into, over, or through just about anything with impunity.Close
*Weight varies depending on bearing and axle specification and does not include tubeless tape and valves, which are factory-installed.
Rims – 34.5mm outer/30.5mm inner width. Second Generation Tubeless-ready profile improves tire retention and gets more rubber on the trail.
Front Hub: - 2 bearings with external o-ring seals. 100mm QR, 9thru, 15mm, Boost 110, and 110x20mm axle options.
Rear Hub: - 4 bearings with external Teflon seals and silicone freehub seal. 135mm QR, 10x135, 12x135, 12x142, and Boost 148 axle options.
Driver: Shimano HG 8-11 spd* or XD1 - 120 point, 3 degree engagement, 6 pawl mechanism.*Not compatible with 11spd Road Cassettes
Spokes - Rear – drive side 2.9/2.7mm butted, non drive 2.9/2.7mm butted. Front - disc side 2.9/2.7mm, non disc 2.9/2.7mm.
2.3" - 2.6" Recommended Tire Width
Front axles options: 100mm QR, 9thru, 15mm, Boost 15x110** and 20 x 110mm axle options
Lefty hub available. Does not include cap/bolt.
Rear axles options: 135mm QR, 10x135, 12x135, and 12x142, and Boost 148**
Singlespeed* specific hub available. 32 spoke version only. Zero Dish.
Custom Colors* - Silver, Blue, Gold, Orange, Pink, Purple, Green, Lime and Turquoise See what we have to say about anodization
Custom Lacing options* - Mix and match spoke colors for a true custom look
XD1 Driver body for SRAM XX1 type cassette.
Hybrid Ceramic bearings*
* -Upcharges apply
**-Requires different hub shellClose
$1255.00 Base Price
Stock configuration - Black hubs, Black spokes.
+$50 Level 1 Custom - Any non-stock combination of Red, Black or Silver - includes custom lacing (red, silver, or black spokes) if requested
+$160 Level 2 Custom - 1 custom color Blue, Gold, Orange, Pink, Purple, Turquoise, Lime and Green (Can be mixed with any combo of red, silver, or black, and includes custom lacing if requested)
+$265 Level 3 Custom - 2 or more custom colors Blue, Gold, Orange, Pink, Purple, Turquoise, Lime and Green - any combination + includes custom lacing
+$205 for Ceramic BearingsClose